Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Freeport: What to Know First
We provide independent Olympia Chimney chimney repair in Freeport, with most jobs completed in a single visit and no-hassle upfront pricing agreed before we start. Typical turnaround from call to repair is a few days, not weeks, because we stock the common Olympia Chimney parts that fail in salt-air climates. We’re not the cheapest outfit in Nassau County, and we don’t try to be - we price the job to do it right the first time, back it with our 90-Day Done Right Promise in writing, and leave you with photos you can see and a plain-English verdict.
This page is for Olympia Chimney owners in Freeport who’ve noticed crumbling mortar, water stains on the ceiling near the fireplace, or bricks that look like they’ve been chewed. If that’s your chimney, call us at (631) 735-5125. A live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless-steel liner collars separating at the seam. The 316Ti flex liners handle Freeport’s freeze-thaw cycles well, but the factory seam welds on earlier production runs can work loose after 8-12 years of thermal cycling. We find this most often in the Merrick Road corridor homes built in the late 1990s. We re-weld or replace the collar section using matching 316Ti stock, not generic 304, so the expansion rate stays consistent with the original liner.
- Olympia Chimney Gelco-style chase covers pooling water at the corners. The stamped steel covers with cross-break creasing shed water fine when new, but the corner seams are a known catch point. In Freeport, with our nor’easter-driven rain and the salt mist off the Atlantic, that pooled water rusts through from the underside in 6-10 years. We fabricate replacement corners in galvanized steel or upgrade to copper on request, and we always pitch the new cover to shed toward the scupper, not the brick.
- Olympia Chimney’s Pro-Form masonry components taking on water through hairline cracks. The Pro-Form crown and shoulder mix is lightweight and sets fast, which is why builders like it. But in Freeport’s climate, the surface crazing that develops after 5-7 years lets water migrate straight to the flue. We don’t just caulk over it. We grind out the cracks, apply a breathable siloxane-based sealant, and if the crown is too far gone, we pour a new concrete crown with proper overhang and drip edge.
- Olympia Chimney terra cotta flue tiles spalling from the inside out. This isn’t an Olympia defect per se, but their spec-grade flues in the 8″ x 12″ and 8″ x 8″ sizes are what we see most in Freeport’s colonial and cape stock. When homeowners burn unseasoned wood or run the furnace through a cold flue, the glaze cracks and the tile face pops off. We camera every flue before recommending anything. If it’s localized, we do a HeatShield cerfractory resurfacing. If it’s systemic, we sleeve with DuraFlex or Olympia’s own 316Ti liner - whichever fits the appliance configuration and your budget.
- Olympia Chimney chimney caps with failed mesh and bent lids from wind gusts. The standard galvanized caps with 3/4″ mesh work until they don’t. We’ve replaced dozens in Freeport after the March 2018 nor’easter and the December 2022 storm that took half the caps off south shore chimneys. We stock the Gelco 5/8″ stainless mesh caps with reinforced corners, or we can spec a custom copper cap if the homeowner wants something that outlasts the mortgage.
Our Olympia Chimney Chimney Repair Process
- 1
Call and schedule. A live person answers, day or night. We ask what you’re seeing, how old the installation is if you know, and whether you’ve got water intrusion, drafting problems, or both. We book a two-hour arrival window.
- 2
Level-2 camera inspection. Our tech runs a chimney camera from top to bottom and documents everything. You get the photos, not just us. We mark the time-stamped footage with our findings.
- 3
Plain-English verdict and upfront pricing. Russell Haines or one of our senior techs explains what’s wrong, what caused it, and what happens if you wait. We give you one price for the repair. That’s the price on the invoice.
- 4
Parts decision: OEM or quality aftermarket. For Olympia Chimney liners and components, we can source factory-equivalent 316Ti from Olympia’s distribution chain or match with DuraFlex or HeatShield where the application allows. We tell you which we’re using and why. No substitutions you didn’t agree to.
- 5
The repair and live testing. We complete most jobs in a single visit. Afterward, we run a smoke test or draft test to confirm the flue draws properly and the repair is sound. If the damper doesn’t seat right, we don’t leave until it does.
- 6
Written guarantee and cleanup. You get the 90-Day Done Right Promise on paper, photos of the completed work, and a workspace left cleaner than we found it.
What Olympia Chimney Chimney Repair Costs in Freeport
| Repair | Typical Range | What Moves the Price |
|---|---|---|
| Localized mortar repointing (up to 15 sq ft) | $450 - $750 | Scaffold need, mortar color match, height of work |
| Olympia Chimney liner collar re-weld or replacement | $380 - $620 | Accessibility from top or bottom, liner diameter |
| Chase cover replacement (Gelco or custom) | $680 - $1,200 | Material (galvanized vs. stainless vs. copper), size, pitch complexity |
| Pro-Form crown crack repair with siloxane seal | $320 - $550 | Linear feet of cracking, whether grinding reaches stable substrate |
| Full concrete crown replacement | $1,100 - $1,800 | Crown dimensions, overhang detail, whether we rebuild shoulder brick |
| Flue tile spall repair (HeatShield resurfacing) | $850 - $1,400 | Flue length, number of offsets, extent of damage |
| Stainless chimney cap with 5/8″ mesh | $280 - $450 installed | Flue count, cap style, material grade |
These are real ranges for Freeport, not teaser prices. Height matters - a two-story colonial on North Main Street with a steep roof costs more to access than a single-story ranch off Atlantic Avenue. Every estimate is free, and we don’t start work until you approve the number. Call (631) 735-5125 for an exact quote.
Why Freeport Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve worked chimneys across Freeport for years, including the older colonials near the Freeport Recreation Center that tend to have the same tired mortar problems decade after decade. We know which Olympia Chimney components hold up in salt air and which ones need watching. Our 90-Day Done Right Promise means if it’s not right, we come back - in writing, no arguing. A live person answers the phone every hour of every day. Our technicians are background-checked, uniformed, and carry the full range of professional-grade materials: DuraFlex, HeatShield, Gelco, and Olympia Chimney’s own line when it’s the right fit. Most jobs finish in one visit. The number on the estimate is the number on the invoice. Done right - and we stand behind it.
FAQs
No, proper repair by a qualified technician does not void your Olympia Chimney warranty, though manufacturer coverage on the original component may have time limits you should check. As an independent Olympia Chimney service provider, we document our work with photos and parts receipts so any future warranty claim has a clear paper trail. Call (631) 735-5125 if you want us to review what’s still covered.
Common Olympia Chimney liners, collars, and caps are in our Freeport-area warehouse or available within 2-3 business days. Specialty sizes or factory-only components can take 5-7 days. We stock DuraFlex and HeatShield equivalents for urgent cases, and we’ll tell you upfront if we’re using a crossover part and why.
Repair makes sense when damage is localized to one or two flue sections and the surrounding masonry is sound. Replacement is the better call when the flue is cracked in multiple locations, the mortar joints between flue tiles are failing, or the chimney has shifted. We camera every flue before recommending either. You’ll see what we see.
Most Freeport homeowners are scheduled within a few days, sooner for active water intrusion or drafting issues that make the fireplace unusable. We don’t overbook. When we give you a window, we’ll be there when we say.
Water keeps working. A small mortar gap becomes a spalled brick, then a leaning chimney, then a rebuild that costs ten times the original repair. Carbon monoxide risk rises if the flue is compromised. Creosote accumulates faster in a damaged flue. The honest answer: some repairs can wait a season if the flue is sound and there’s no active leak, but water and combustion gases don’t get better on their own. Call (631) 735-5125 for a free inspection and we’ll tell you where you stand.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Freeport and nearby areas.