A Hearthstone company - serving Freeport, NY
Hearthstone Chimney Co. chimney cleaning team

Chimney Liner & Rebuild Cost - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Chimney Liner & Rebuild Cost in Freeport?

Our Chimney Liner & Rebuild services in Freeport, NY typically run between $1,800 and $6,500, depending on whether you need a full liner replacement, a partial rebuild, or both. A stainless steel liner for a standard Freeport colonial or Cape Cod generally falls in the $2,200 to $3,800 range, while a full chimney rebuild from the roofline up can reach $4,500 to $8,500 or more for taller structures on older homes. Most Hearthstone customers in Freeport are surprised to learn that a properly done liner job – with the right materials and sizing – is a one-time fix that can last 20 to 30 years.

Chimney Liner & Rebuild Cost Breakdown (2026)

The table below reflects what Hearthstone Chimney Co. sees in real Freeport jobs. These are market-honest ranges – not lowball numbers to get in the door, not inflated figures padded for negotiation. The number on our estimate is the number on the invoice.

Service Typical Freeport Price Range (2026)
Flexible stainless steel liner (6″ – gas appliance) $1,800 – $2,600
Flexible stainless steel liner (7″ – 8″, oil or wood) $2,200 – $3,800
Rigid stainless steel liner system $2,500 – $4,200
HeatShield cerfractory resurfacing (liner repair without full replacement) $1,400 – $2,800
Cast-in-place liner system (older masonry chimneys) $3,500 – $6,500
Chimney crown repair or replacement $350 – $900
Partial chimney rebuild (above roofline, 3-5 courses) $1,200 – $2,800
Full chimney rebuild (above roofline, 6+ courses) $3,500 – $7,500
Full chimney rebuild (ground up, structural) $6,500 – $12,000+
Liner plus crown plus cap (common Freeport package) $2,800 – $4,800
Level-2 camera inspection (required before liner work) $149 – $249

A few things move the needle in either direction. Freeport sits on the South Shore of Long Island, and the salt air from the Nautical Mile and Freeport Creek gets into brick mortar faster than it does ten miles inland. We regularly see chimneys on homes near Baldwin Harbor and Cow Meadow Park that have mortar joints failing at 15 years instead of 25 – the same deterioration that would take decades elsewhere is accelerated by the coastal exposure. That means rebuild jobs here sometimes require more courses of new brick than the initial inspection suggests, and it is worth budgeting a small buffer if your chimney faces southwest toward the water.

Labor in Nassau County runs higher than upstate or out east. Scaffold or lift equipment on Freeport’s narrower residential lots – particularly in the streets running off South Main or near the canals – can add $200 to $500 to a job versus a home with a wide driveway and clean access. Material costs for DuraFlex liner systems and Olympia Chimney supplies have stabilized since 2024, but the professional-grade components we use are not the same as builder-grade liners available to discount contractors – and that difference shows up in longevity.

What Affects Chimney Liner & Rebuild Pricing in Freeport

  • Chimney height and flue length: A two-story Freeport colonial with a chimney rising four feet above the ridge line needs more liner material and more time to install than a single-story ranch. Every additional linear foot of flue adds material and labor cost – typically $40 to $90 per foot depending on diameter and liner type.
  • Liner diameter and appliance type: Gas inserts use smaller flues (often 5″ to 6″) than wood-burning fireplaces (7″ to 8″) or oil-fired boilers (sometimes 8″ to 10″). Sizing matters for draft performance and safety. Incorrect sizing is one of the most common mistakes we correct after discount installers have been through a house.
  • Coastal salt-air deterioration: As noted above, South Shore Nassau County homes experience mortar erosion and brick spalling faster than inland properties. Homes within a half mile of the water – including neighborhoods near Freeport’s canals and the bay – tend to need more masonry work as part of a rebuild scope. We photograph every course before we price it so you can see exactly what we saw.
  • Existing liner condition (and whether removal is needed): If there is a deteriorated terra cotta tile liner that has to be broken out before the new liner goes in, that demolition adds labor. HeatShield resurfacing can sometimes save an older tile liner that has hairline cracks but no structural failure, and at $1,400 to $2,800 it is meaningfully cheaper than a full replacement. We will tell you honestly which option fits your situation.
  • Chimney crown and cap condition: A failing crown lets water into the flue. On Freeport homes built in the 1940s through 1960s – which make up a large share of the housing stock on the east side of town – the original crowns are often just mortar wash, not proper overhanging crowns. Replacing them correctly while the scaffold is already in place costs far less than returning later.
  • Access and site conditions: Row-style homes near downtown Freeport, homes on canal lots with tight side yards, or properties where equipment has to be staged on a narrow driveway all take more setup time. We factor this into the estimate upfront – there will not be a surprise line item on the invoice because access was harder than expected.
  • Permit requirements: Nassau County requires permits for structural chimney work, and Freeport Village has its own building department review process. Permit costs typically run $150 to $350 for liner and rebuild work. Hearthstone pulls permits where required – if a contractor does not mention permits for a full rebuild, that is a red flag worth pressing on.

How to Save on Chimney Liner & Rebuild in Freeport

Bundle the Work While the Scaffold Is Up

The most reliable way to reduce total cost is to address everything that needs attention in a single visit. Scaffold rental and setup accounts for a real portion of any above-roofline job. If the liner needs replacing and the crown is cracked and the cap is corroded, handling all three while the crew is already staged on your Freeport roof costs far less than scheduling each item separately. Russell Haines and the team will walk through every item found in the Level-2 camera inspection and give you a clear picture of what is urgent, what can wait a season, and what makes sense to bundle now.

Consider HeatShield Before Committing to Full Liner Replacement

Not every deteriorated liner needs to be replaced. HeatShield cerfractory resurfacing can restore a cracked tile liner that is structurally sound – at roughly half the cost of a full stainless liner installation. We use it where it is genuinely the right call, not as a shortcut to a cheaper-looking estimate. If your flue tiles have minor cracking without separation or large gaps, ask about this option specifically.

Use Our Standing Promotions

Hearthstone offers $50 off any repair over $250, a permanent 5% senior and veteran discount, and a free second opinion on any written estimate you have already received from another contractor. If someone gave you a number that seems high – or suspiciously low – we will look at it without charge and tell you what we think, plainly. Call (631) 735-5125 to set up a free estimate or second opinion.

Do Not Wait Until the Problem Is Bigger

This is not urgency language – it is arithmetic. A liner with hairline cracks caught at a seasonal tune-up is a repair. Left another two winters, it becomes a replacement. Left another two winters after that, water has found its way into the masonry and the crown, and now you are talking about liner plus rebuild. The $89 seasonal tune-up catches the small things before they become large ones. Freeport’s coastal winters are hard on masonry, and a single nor’easter can push water through a failing crown in ways that accelerate damage quickly.

Ask for Upfront Pricing in Writing

Get any estimate in writing before work starts, and confirm that the estimate covers the full scope – materials, labor, permits, and cleanup. Hearthstone’s upfront pricing means the number on the estimate is the number on the invoice. That is the only way to compare quotes honestly. Low-bid contractors often scope minimally and add line items once they are on your roof – a practice that is unfortunately common in the Nassau County market.

FAQs – Chimney Liner & Rebuild Cost in Freeport, NY

How much does a chimney liner cost in Freeport, NY in 2026?

A chimney liner in Freeport typically costs $1,800 to $3,800 for a standard stainless steel flexible liner sized for gas or wood appliances, based on current Freeport market pricing. Cast-in-place systems or larger diameter liners for oil-fired boilers can run $3,500 to $6,500. The final number depends on flue length, diameter, access, and whether any tile removal is needed beforehand. Call (631) 735-5125 for a free on-site estimate – we measure the flue and give you a written number before any work begins.

Is it cheaper to repair a chimney liner or replace it entirely?

Repair is cheaper when the tile liner is structurally intact with minor cracking. HeatShield resurfacing runs $1,400 to $2,800 and can extend the life of a sound tile liner by 20 years or more. Full replacement with stainless steel typically runs $2,200 to $4,200 for a Freeport home. The determining factor is the Level-2 camera inspection – photos of the actual flue condition make the decision straightforward. We will show you what we see and tell you what we honestly recommend. Call (631) 735-5125 to schedule an inspection.

How much does a chimney rebuild cost in Freeport?

A partial rebuild (3 to 5 courses of brick above the roofline) runs $1,200 to $2,800 in the Freeport area. A full above-roofline rebuild of 6 or more courses typically runs $3,500 to $7,500. A structural ground-up rebuild is $6,500 to $12,000 or more, though this is uncommon outside of severely neglected chimneys or post-storm damage. Freeport’s coastal environment accelerates mortar joint deterioration, so homes within a few blocks of the bay or canals may need more brick work than a comparable home further inland. Call (631) 735-5125 for a free estimate with photos documenting exactly what we find.

Do I need a permit for chimney liner or rebuild work in Freeport, NY?

Yes, Nassau County and Freeport Village require permits for structural chimney work and liner installations in most cases. Permit costs typically run $150 to $350 and are separate from labor and materials. Hearthstone pulls the required permits as part of the job – we do not leave that to the homeowner to sort out. If a contractor quotes you a rebuild without mentioning permits, ask them directly whether they plan to pull one. Work done without a permit can create issues when you sell the house or file a homeowner’s insurance claim.

Can you replace a chimney liner in one day in Freeport?

Most standard liner replacements in Freeport – flexible stainless steel for a single flue on a two-story home – are completed in a single visit, typically 4 to 7 hours. Rigid liner systems, cast-in-place systems, or jobs that include tile removal, crown repair, and cap installation may require a second day. We tell you at the estimate stage how many visits the job requires so you can plan accordingly. Hearthstone technicians are background-checked, uniformed, and come prepared to complete the full scope in one trip whenever possible.

Why does my Freeport chimney need a liner at all?

An unlined or deteriorated chimney flue allows combustion gases – including carbon monoxide – to seep through cracks in the masonry into living spaces, and allows heat transfer that can ignite nearby framing. The National Fire Protection Association standard (NFPA 211) requires a code-compliant liner for every chimney serving a heat-producing appliance. Beyond safety, a properly sized liner dramatically improves draft, which means your fireplace or furnace runs more efficiently and produces less creosote buildup. On Long Island’s South Shore, water intrusion through a failing liner also accelerates interior masonry damage – a problem that compounds quickly through Freeport winters.

What is the 90-Day Done Right Promise?

The 90-Day Done Right Promise means that if any work Hearthstone performs is not right – draft problem, material defect, installation issue, anything – we come back and make it right, in writing, with no arguing and no paperwork run-around. It covers every liner and rebuild job we complete in Freeport. This is not fine-print language; it is the K.E.Y.S. standard we operate by: Krafted right, Every time, Your home first, Standing behind it. It is in the estimate before the work starts, and it holds for 90 days after the job is done.

Why Freeport Homeowners Choose Hearthstone Chimney Co.

There is no shortage of chimney contractors on Long Island. Some advertise the lowest price. Some show up in unmarked trucks. Some sub out the work to whoever is available that week. Hearthstone has been doing this since 1984 – over 42 years serving communities across Nassau and Suffolk counties, including Freeport and its surrounding neighborhoods.

Russell Haines and the Hearthstone team built this company on a straightforward idea: document what you find, tell the customer plainly what it means, do the work correctly with professional-grade materials, and stand behind the result in writing. That is it. No bait-and-switch pricing. No inflated scopes. No mystery on the invoice.

Every job starts with a Level-2 camera inspection – photos you can actually see on a screen, not a verbal report you have to take on faith. We use DuraFlex liner systems, HeatShield resurfacing products, Gelco and Famco components, Olympia Chimney supply materials, and Copperfield accessories because those are the professional-grade products that hold up. We do not substitute builder-grade components to trim cost from a bid.

Our Chimney Liner & Rebuild in Freeport service page covers the full scope of what we do – liner sizing, liner types, rebuild methods, and what a typical Freeport inspection turns up. If you are comparing quotes or trying to understand what a previous contractor told you, that page will help you read the numbers more clearly.

When you call (631) 735-5125, a live person answers. Not a voicemail. Not a callback queue. A live person, every hour of every day. They will get you scheduled for a free on-site estimate, confirm what the job involves, and give you a written number before any work begins. The number on that estimate is the number on the invoice – no surprises.

Freeport is a community we have been working in for decades. The homes near Babylon Turnpike, the older colonials off Pine Street, the waterfront properties along the canal streets – we know the chimney problems that come with each type of house and each part of town. That local familiarity is worth something when a technician gets on your roof and has to make judgment calls about what he finds. Experience with the actual conditions in this specific town makes those calls better.

For homeowners who have been in their house for twenty years or more and want the job done correctly so they never have to think about it again, that is exactly what we offer. Done right, and we stand behind it.

Key Takeaways

  • Chimney liner replacement in Freeport runs $1,800 to $3,800 for most stainless steel installations; cast-in-place systems run $3,500 to $6,500.
  • HeatShield cerfractory resurfacing costs $1,400 to $2,800 and can save a structurally sound tile liner without full replacement.
  • Chimney rebuilds in Freeport run $1,200 to $2,800 for partial work and $3,500 to $7,500 for a full above-roofline rebuild.
  • Freeport’s coastal salt air accelerates mortar deterioration – South Shore homes near the bay or canals often need more masonry work than comparable inland properties.
  • Nassau County and Freeport Village require permits for most liner and rebuild jobs; Hearthstone pulls them as part of the scope.
  • All work is covered by the 90-Day Done Right Promise – in writing, no arguing.
  • Bundling liner, crown, and cap work while the scaffold is already set reduces total cost meaningfully.
  • Hearthstone offers a free estimate, a free second opinion on any written quote, $50 off any repair over $250, and a 5% senior and veteran discount.
  • Every job begins with a Level-2 camera inspection with photos you can see and a plain-English verdict.

Ready for a Free Estimate?

If your chimney liner is cracked, your firebox is drafting poorly, or you have had a mason tell you the chimney needs work and you are not sure where to start, call Hearthstone Chimney Co. at (631) 735-5125. A live person will answer, get your address, and schedule a free on-site estimate at a time that works for you. We will bring the camera, show you what we find, and give you a written price before any decision has to be made.

You can also visit our home page to learn more about the full range of services Hearthstone provides across Nassau and Suffolk counties.

The 90-Day Done Right Promise applies to every job we take on in Freeport. If the work is not right, we come back. In writing. No arguing.

Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Freeport, NY since 1984. Pricing reflects the Freeport market as of 2026. Hearthstone Chimney Co. offers free estimates – call (631) 735-5125.

What Our Customers Say

★★★★★ 5.0 from 5+ reviews

"Booked a sweep, and he told me it did not need one yet and to call back next season. Charged me the inspection fee and nothing else."

- Tara Delaney

"Drop cloths everywhere, a HEPA vac running the whole time, and not a speck of soot on the carpet. I had been dreading the mess for nothing."

- Danielle Norris

"Second property I have had them at. Both times the tech showed me photos from inside the flue before quoting anything."

- Ryan Hoffman
Need Chimney Cleaning help in Freeport? Licensed & insured · Photo-documented response · free estimates
Call (631) 735-5125

Request a Free Estimate

Tell us what's going on in Freeport - we'll get back to you fast. No obligation.

By submitting this form, you acknowledge our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch