Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Uniondale
Chimney liner replacement and rebuild work in Uniondale typically runs $2,800-$7,500 depending on scope, with most projects completed in a single visit after a Level 2 camera inspection. If your Uniondale home still has its original 1945-1965 clay tile flue liner, you’re likely past the 50-year service life, and the salt-laden Atlantic air this close to the Great South Bay has probably accelerated crown and mortar damage you can’t see from the ground. Call (631) 735-5125 - a live person answers, 24 hours a day, and we’ll schedule your free estimate with our Chimney Liner & Rebuild team.
We’ve been dispatching crews to Uniondale from our New York City office for decades, and we know the hamlet’s housing stock intimately: the compact Cape Cods off Uniondale Avenue, the post-war ranches along Jerusalem Avenue, the split-levels tucked behind Hempstead Turnpike. These aren’t theoretical chimneys to us. We’ve pulled crumbling clay tile from flues in the neighborhoods near Hofstra University, rebuilt crowns on homes a stone’s throw from the Meadowbrook Parkway corridor, and documented salt-air corrosion on caps from Merrick Road to the Northern State. Uniondale’s conditions are specific, and the work should be too.
Why Hearthstone Chimney Co. Is Uniondale’s Preferred Chimney Liner & Rebuild Company
Uniondale homeowners tend to stay put. The 55-to-75-year-old residents we serve have owned their houses for twenty, thirty, sometimes forty years. They’ve watched contractors come and go. They remember the ones who disappeared mid-job or invented problems to pad the bill. We don’t work that way, and after 42 years in business, we couldn’t if we tried - our reputation in Nassau County is built on showing up, documenting what we find, and standing behind the result.
Our Level 2 camera inspections end with photos you can see and a plain-English verdict. No jargon, no scare tactics. If your liner has five years left, we’ll say so. If it’s cracked and venting combustion gases into your walls, we’ll show you the image and explain exactly what needs to happen. Our 90-Day Done Right Promise is in writing, with no arguing - if it’s not right, we come back. That’s the Keystone Standard: Krafted right, Every time, Your home first, Standing behind it.
Background-checked, uniformed technicians complete most liner and rebuild jobs in a single visit, with no-hassle upfront pricing. The number on the estimate is the number on the invoice. And when you call (631) 735-5125, a live person answers - not a voicemail, not a callback queue, not an app. Every hour, every day.
Our Chimney Liner & Rebuild Services in Uniondale
Stainless Steel Liner Installation
For Uniondale’s salt-air environment, stainless steel isn’t an upgrade - it’s the baseline. Galvanized caps and components rust through in a few seasons here, five miles from the Great South Bay. We install flexible and rigid stainless liners from DuraFlex and Olympia Chimney, sized precisely to your appliance and venting configuration. On a 1950s Cape Cod near Uniondale Avenue, our crew found the original clay tile flue liner cracked and spalling into the firebox after decades of oil-burner exhaust. We installed a flexible stainless steel liner with a new stainless cap and rebuilt the crown to shed salt-laden rain, restoring proper draft and passing a Level 2 inspection camera check. The homeowner said the chimney had been untouched since they converted to gas years earlier. Typical stainless liner installation in Uniondale runs $2,800-$4,200.

Flexible Liner Systems
Uniondale’s post-war chimneys often have offsets, corbels, or narrow flue passages that make rigid stainless impossible to fish through. Flexible liners from DuraFlex navigate these obstacles without damaging original masonry. They’re particularly useful in the compact ranches on 40-foot lots where chimney footprints are tight and there’s no margin for error. We pair flexible liners with proper insulation and stainless caps rated for coastal exposure. Expect $2,400-$3,800 for most Uniondale flexible liner installations.

Liner Replacement
When the original clay tile is beyond patching - multiple cracks, missing sections, or glaze buildup from decades of oil soot - full liner replacement is the only safe path. This is common in Uniondale. The hamlet’s housing stock was built during Nassau County’s oil-heating era, and those liners spent 40-60 years venting corrosive sulfur-laden exhaust. We remove the damaged tile (carefully, given the soft-lime mortar in these chimneys), install a new stainless or insulated liner, and seal the system to current NFPA 211 standards. Liner replacement in Uniondale typically costs $3,200-$5,500.

Partial Rebuild
Not every failing chimney needs to come down to the roofline. In Uniondale, we frequently perform partial rebuilds: replacing the crown, repointing mortar joints damaged by salt and freeze-thaw, installing new stainless flashing, and capping with a properly sized stainless cap. This preserves sound brickwork below while addressing the components that actually failed. A partial rebuild on a Uniondale Cape Cod or ranch runs $1,800-$3,500, compared to $6,000-$7,500 for full reconstruction. We’ll tell you honestly which path your chimney needs - nothing is recommended without camera evidence you can see for yourself.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Uniondale
We work exclusively with professional-grade materials: DuraFlex flexible liners, Olympia Chimney rigid systems, and Famco stainless caps and flashing. No builder-grade substitutes. These brands are specified for coastal conditions and carry warranties that hold up in salt-air environments. We stock common liner diameters and cap sizes for Uniondale’s typical appliance configurations, so most jobs don’t wait on parts. When your chimney is venting combustion gases, that turnaround matters.
Common Chimney Liner & Rebuild Problems We See in Uniondale Homes
- Galvanized caps and flashing corroded through by salt air. Uniondale’s proximity to the Great South Bay means Atlantic moisture carries corrosive salt inland year-round. Galvanized steel components that might last a decade inland rust through in three to five seasons here, letting water into the flue to accelerate liner damage. We replace these with stainless equivalents as standard practice.
- Original clay tile flue liners cracked and spalling from age and oil soot. Virtually every masonry chimney in Uniondale contains a clay tile liner now 60-80 years old, well past its 50-year design life. Decades of oil-burner exhaust created acidic condensation that eroded the tile from the inside, and freeze-thaw cycles stressed what remained. Camera inspection nearly always finds damage.
- Orphaned oversized flues after oil-to-gas conversions. A high share of Uniondale homeowners converted to high-efficiency gas heat under NY State energy incentive programs. These new appliances often vent into chimneys sized for old oil burners, creating poor draft, acidic condensation, and accelerated deterioration of liners that were already marginal. The chimney may look unused, but it’s working harder than ever.
- Soft-lime mortar joints eroded by salt and freeze-thaw. Uniondale’s original 1945-1965 construction used mortar formulations that are less durable than modern Type N or Type S mixes. Combined with salt-laden air and dozens of freeze-thaw cycles each winter, joints crumble and allow water penetration that destabilizes the entire structure. Repointing with proper mortar is essential during any liner project.
Pricing for Chimney Liner & Rebuild in Uniondale, NY
We’re plain about costs because Uniondale homeowners have heard too many stories of estimates that ballooned once work started. Here’s what liner and rebuild work actually runs in this market:
| Service | Typical Range in Uniondale |
|---|---|
| Stainless steel liner installation | $2,800 - $4,200 |
| Flexible liner system | $2,400 - $3,800 |
| Full liner replacement | $3,200 - $5,500 |
| Partial rebuild (crown, cap, repointing) | $1,800 - $3,500 |
| Full chimney rebuild | $6,000 - $7,500 |
| Level 2 camera inspection with photo report | $250 - $350 |
What moves the needle: chimney height and accessibility, whether the flue has offsets requiring flexible liner, extent of masonry damage, and whether the project requires scaffolding. We provide no-hassle upfront pricing - the number on the estimate is the number on the invoice. Every repair over $250 qualifies for $50 off, and we offer a permanent 5% senior and veteran discount. Call (631) 735-5125 for your exact quote - estimates are free.
We Also Serve Cities Near Uniondale
Our crews work throughout central and south Nassau County, including Uniondale and neighboring Hempstead, Roosevelt, Merrick, and Freeport. The same salt-air conditions, post-war housing stock, and oil-to-gas conversion history apply across this corridor, and we bring the same documentation standards and 90-Day Done Right Promise to every job.
Serving Uniondale, NY - Our Local Coverage Area
We’re based in the Uniondale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Uniondale
Salt-laden Atlantic air accelerates corrosion of galvanized caps, crowns, and flashing by a factor of two or three compared to inland Nassau County, and it erodes soft-lime mortar joints faster than freeze-thaw alone would explain. For Uniondale chimneys, we specify stainless steel components as standard, not as an upsell, and we recommend maintaining the NFPA 211 annual inspection interval without stretching it - exterior masonry here degrades visibly between seasons. Call (631) 735-5125 to schedule your inspection.
Almost certainly yes, or at minimum a camera inspection to confirm condition. Uniondale’s 1945-1965 housing stock means your clay tile liner is 60-80 years old, past the 50-year service life, and has likely spent decades venting corrosive oil-burner exhaust that cracked and spalled the interior. We regularly find liners that look intact from the top but are shedding tile fragments into the firebox below. The inspection costs $250-$350 and includes photos you can see; if replacement is needed, we’ll show you exactly why. Call (631) 735-5125 for an exact quote - estimates are free.
Many Uniondale chimneys need only partial rebuild work - crown replacement, stainless cap installation, and strategic repointing - if the brickwork below the roofline remains sound. We determine this with a Level 2 camera inspection and exterior assessment; nothing is recommended without photo evidence you can review yourself. Full rebuilds are reserved for chimneys with structural compromise, widespread spalling, or leaning. A partial rebuild in Uniondale runs $1,800-$3,500 versus $6,000-$7,500 for full reconstruction. Call (631) 735-5125 and we’ll tell you honestly which your chimney needs.
Yes, and this is one of the most dangerous assumptions we encounter in Uniondale. High-efficiency gas appliances often vent into oversized flues designed for oil burners, creating poor draft and acidic condensation that deteriorates liners from the inside - even when the chimney appears “unused.” The conversion may have orphaned your flue entirely, or left it venting a new appliance without proper relining. We’ve inspected chimneys in Uniondale that sat untouched for 15-20 years post-conversion and found packed oil-soot residue, flaking tile, and blocked passages. An inspection is non-negotiable. Call (631) 735-5125 to book yours - estimates are free.
We install DuraFlex flexible liners, Olympia Chimney rigid systems, and Famco stainless caps and flashing - all specified for salt-air exposure and backed by warranties that hold up in coastal environments. No galvanized substitutes, no builder-grade materials. These are the same brands we use on every liner job because they’ve proven they last in conditions like Uniondale’s. Call (631) 735-5125 for specifics on your chimney’s configuration.
Ready to get your Uniondale chimney inspected and know exactly where you stand? Call (631) 735-5125 now. A live person will answer, 24 hours a day, and we’ll get your free estimate scheduled with our background-checked, uniformed crew. Photos you can see, a plain-English verdict, and work backed by our 90-Day Done Right Promise in writing - that’s how we’ve done it for over 42 years.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Uniondale and Nassau County since 1984.





Before
After
Before
After
Before
After